Reply To: Factory Talk View ME issue

AdminFred Graham
  • Topics: 16
  • Replies: 166
  • Total Posts: 182

The IP address will be under Terminal Settings ->Network Settings when you power up the PVP. Here you will be able configure the IP address of the display. Once configured ensure your PC is on the same network as your display (i.e. if you set the IP of the PVP to make sure your NIC is set on the same network say This video should help with the PC setup if youre unsure.The IP of your PC just has to be unique and on the same network as your display. you can confirm you are communicating with the display using RSLinx. Once you can see the PVP you should be able to browse and downlaod to the display via RSLinx Enterprise and FTV Studio Transfer Utility.