Reply To: Stratix 5700 Inter-VLAN Routing Issue

  • Topics: 1
  • Replies: 1
  • Total Posts: 2
Karma: 15
Rank: Padawan

I solved my own issue above and thought I would take the time to share my findings.

1. I did not have to configure Gateway Address in order for inter-VLAN routing to work

2. When attempting my configuration, I disconnected from my wireless network (using wired to connected to Stratix network). Apparently, this was not enough. Once I went into Network Connection Settings on my PC and completely ‘disabled’ the wireless adapter, only then was I able to ping the devices I had setup connected to different VLANs via my Ethernet connection

Hope this helps those struggling with the same issue.