Reply To: Implementing ControlLogix PIDE Simulator


Hi Jim.

First, thank you for supporting this project, and yes…sometimes videos make things look easier then they actually are (the power of post-processing!). Let’s work together to get this resolved for you.

First, it is expected that you will be updating the controller revision and FTV project file to a later version. These were developed intentionally in the earlier versions for maximum portability.

Next, by default the emulator software is likely going to place your controller in slot 2 not slot 0 as I’ve done in the video. You will need to move the RSLinx module as shown into a different slot (I used slot 8) and then assign the controller to Slot 0.

Can you confirm that these steps are complete and then we’ll move on from there.