1763 Lxxx Micro Logix 1100 Controllers

https://www.linkev.com/?a_fid=ics-eng
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #4044
    Simeon Efe-ImafidonSimeon Efe-Imafidon
    Participant
    • Topics: 1
    • Replies: 0
    • Total Posts: 1
    Karma: 14
    Rank: Padawan

    Hi all,

    Can the free rockwell software provided by rockwell automation as described from this link https://compatibility.rockwellautomation.com/Pages/MultiProductDownload.aspx?crumb=112 (the 1763 Lxxx Micro Logix 1100 programmable controllers / micrologix) be installed in windows 8 or windows 10 operating system? Its working for windows 7 not sure about windows 8 or 10.

    #4045
    Mister IncredibleMister Incredible
    Participant
    • Topics: 8
    • Replies: 16
    • Total Posts: 24
    Karma: 48
    Rank: Padawan

    Hi Simeon,

    I don’t believe there is any official support for the Micrologix 1100 starter kit (free version) on Win 10. There’s actually a pretty detailed article here. The free starter kit versions only supports up to firmware version 10 too I believe so depending on your specific controller you may be out of luck. Of course just because there is no official support for Win 10 you could always try it, I’ve had pretty good success with RSLogix500 and 5000 that don’t show “official” support in their compatibility matrix…so you could always just try it. If not use a VM running Win 7.

    Cheers!

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.