Emerson’s Stand-alone RTU selection

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #1262
    IdealIdealDan
    Participant
      Karma: 45
      Rank: Padawan

      Hi Guys,

      I’m making a selection for emerson’s stand alone  RTU, after going thru their site, I’m yet not too clear on one to select. Please if you have used emersion’s stand alone RTU (not with PLC). Kindly send me the part no. for their RTU that can suite a SCADA application where Data will be pulled from existing PLCs on over 60 sites for integration. This help is urgent please and I  can’t wait for their customer care to respond.
      Thanks in advance for your input

      #1263
      mrincrediblemrincredible
      Participant
        Karma: 53
        Rank: Padawan

        Hey PLC Bros,

        You can check out Emersons ControlWave Express units. I’ve seen these units deployed in some waster water facilities I’ve worked in. I don’t have direct experience with these units myself, but you may want to give it a look to see if it suits your needs. You can view cut sheet here.

        Good luck!

        #1265
        PLCGurutfgmedia_admin
        Keymaster

          You may want to look into the ROC800 series of RTU’s, depending on what exactly it is you intend to do with these things, i.e., interface a PLC and/or SCADA directly. I think the Controlwave line is dicontinued as mentioned above but I could be wrong.

        Viewing 3 posts - 1 through 3 (of 3 total)
        • You must be logged in to reply to this topic.