How to Program DPT flow calculations in RSLogix5000

Home PLCGurus.NET Live & Interactive Forum PLC Questions and Answers Rockwell, Allen-Bradley, Stratix How to Program DPT flow calculations in RSLogix5000

https://www.linkev.com/?a_fid=ics-eng

This topic contains 2 replies, has 2 voices, and was last updated by PLC_Bros Bros PLC_Bros 4 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #5067
    PLC_Bros Bros
    PLC_Bros
    Participant
    • Topics: 13
    • Replies: 14
    • Total Posts: 27
    Karma: 38
    Rank: Padawan

    Hi Friends,

    Please tell me how to Program DPT flow signal to flow/ calculations in RSLogix5000?

    Thanks in advance

    #5068
    Fred Graham
    Fred Graham
    Keymaster
    • Topics: 13
    • Replies: 158
    • Total Posts: 171

    Hi PLC_Bros,

    As you can imagine, this is very difficult to answer with what little information you have provided. Please take the time to articulate your problem, this will give you the best chance of someone being able to help.

    With that, computations in RSLogix 5000 are best handled using the “Compute” (CPT) instruction. Not sure if this is what you were asking, however, please take a look at this instruction.

    Cheers!

     

    #5247
    PLC_Bros Bros
    PLC_Bros
    Participant
    • Topics: 13
    • Replies: 14
    • Total Posts: 27
    Karma: 38
    Rank: Padawan

    Hi Fred,

    Thanks for responding!

    Actually, I know about CPT, but I want to learn how to achieve flow reading from DPT attached to an orifice Plate in a Pipeline carrying Natural Gas or crude oil . Assuming we are recieving 4-20 mA from this DPT how do I program for flow reading in RSLogix5000.

    Your response will be appreciated!

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic. Login Register