PLC5/30 DO Slot swap

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #19494
    IdealPLC_Bros
    Participant
      Karma: 45
      Rank: Padawan

      Hi Friends,

      I’m to swap a few Digital Outputs (XV) from their slot to a different slot. The Processor is a PLC5/30 (Ethernet). I’m more familiar with RSLogix500 and RSLogix5000, I’ve not done much with RSLogix5. I will appreciate your ideas.

      1. What configuration changes do I Carry out? (I Slot addressing is used).
      2. How Do I tie the DOs to a different Slot/card? (Cards are 1771-OW16B )

      Thanks in advance.

      #19496
      PLCGuruPLCGuru
      Keymaster

        Hi PLC_Bros! It’s been a long time since I looked at a PLC 5. I don’t even have copy of software that I can help you along with any longer. One thing to know, PLC 5 uses octal addressing 0-7 and 10-17, so keep this in mind when you’re mapping. Let us know how you make out.

        #19497
        IdealPLC_Bros
        Participant
          Karma: 45
          Rank: Padawan

          Alright.

          Thanks

        Viewing 3 posts - 1 through 3 (of 3 total)
        • You must be logged in to reply to this topic.